MAXQ2010提供LCD驱动器的16位混合信号微控制器

MAXQ2010提供LCD驱动器的16位混合信号微控制器

The MAXQ2010 microcontroller is a low-power, 16-bit device that incorporates a high-performance, 12-bit, multichannel ADC and a liquid-crystal display (LCD) interface. A combination of high performance, low power, and mixed-signal integration makes the MAXQ2010 ideal for a wide variety of applications.

The MAXQ2010 has 64KB of flash memory, 2KB of RAM, three 16-bit timers, and two universal synchronous/asynchronous receiver/transmitters (USARTs). Flash memory aids prototyping and is available for mass production. Mask ROM versions are available for large production volumes when cost is a critical factor. The microcontroller runs from a 2.7V to 3.6V operating supply. For the ultimate in low-power performance, the MAXQ2010 includes a low-power sleep mode, the ability to selectively disable peripherals, and multiple power-saving operating modes.

maxq2010关键特性

• High-Performance, Low-Power, 16-Bit MAXQ® RISC Core
• DC to 10MHz Operation, Approaching 1MIPS per MHz
• 2.7V to 3.6V Operating Voltage
• 33 Instructions, Most Single Cycle
• Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
• 16-Level Hardware Stack
• 16-Bit Instruction Word, 16-Bit Data Bus
• 16 x 16-Bit General-Purpose Working Registers
• Optimized for C-Compiler (High-Speed/Density Code)
• On-Chip FLL Reduces External Clock Frequency
• Memory Features
  • 64KB Flash Memory (In-Application and In-System Programmable)
  • 2KB Internal Data RAM
  • JTAG Bootloader for Programming and Debug
• Peripheral Features
  • 12-Bit SAR ADC with Internal Reference and Autoscan
    • Eight Single-Ended or Four Differential Inputs
    • Up to 312.5ksps Sample Rate
  • Supply Voltage Monitor with Adjustable Threshold
  • One-Cycle, 16 x 16 Hardware Multiply/Accumulate with 48-Bit Accumulator
  • Three 16-Bit Programmable Timers/Counters with PWM Outputs
  • 32-Bit Binary Real-Time Clock with Digital Trim Capability
  • Integrated LCD
    • 160 Segments
    • No External Resistors Required
  • Two USARTs, I²C Master/Slave, and SPI Master/Slave Communications Ports
  • On-Chip Power-On Reset/Brownout Reset
  • Programmable Watchdog Timer
• Low Power Consumption
  • 1mA (typ) at 1MHz Flash Operation at 2.7V
  • 370nA (typ) in Stop Mode
  • Low-Power Power-Management Mode (PMM)

应用/使用